Drag Inversion Liners
Drag Inversion Liners There are 11 products.
Subcategories
-
PROFLEX LINER (For inversion)
PFL75INV - Proflex Liner (for inversion) 75mm x 3mm - For air tight and water-tight applications PFL100INV - Proflex Liner (for inversion) 100mm x 3mm - For air tight and water-tight applications PFL150INV - Proflex Liner (for inversion) 150mm x 3mm - For air tight and water-tight applications
-
END LINER PATCH KIT (10 PATCHES)
For sealing between liner and pipework to give a water and airtight seal - as recommended by the WRC work practise Box contain 10 x 300mm long mini patches and sufficient silicate Kits for 100mmØ & 150mmØ pipes.
-
FLEXILINER (For inversion and Drag-in)
Thinner outer coating for added flexibility For use in any inversion machine, and can also be dragged-in For use in bends up to 65° (inversion) or 90° (Drag-in) Low Friction Double heat-welded seam for added strength For air-tight and water-tight applications Fast resin absorption
-
STITCHED FLEXILINER (For inversion and...
Double heat-welded and stitched seam for added strength PVC Thinner outer coating for added flexibility For use in any inversion machine, and can also be dragged-in For use in bends up to 45° Low Friction For air-tight and water-tight applications Fast resin absorption
-
LIGHT DUTY STITCHED INFLATION /...
Continuous Heat Welded and Stitched PVC Inflation Hose Will invert using air or water up to 80°C For use in tight bends or long runs Supplied in any lengths up to 100m
-
MEDIUM DUTY INFLATION / CALIBRATION HOSE...
Continuous Heat Welded Inflation Hose Will invert using air or water up to 64°C Can be used to re-inflate liners Supplied in any lengths up to 100m
-
90° RENOPATCH
For patch lining 90° bends. Ideal for installations in lower ambient temperatures Cures in aproximately 30 minutes at 16°c or 45 minutes at 12°c High quality multi-axle glass cloth for extra strength and better finish Compact packaging Easy installation Cost effective solution 100% non-shrink silicate resin, minimum odour, non solvent Kits available for...
-
RENOPATCH FAST CURE
Ideal for installations in lower ambient temperatures Cures in aproximately 30 minutes at 16°c or 45 minutes at 12°c High quality multi-axle glass cloth for extra strength and better finish Compact packaging Cost effective solution 100% non-shrink silicate resin, minimum odour, non solvent Kits available for 100mm Ø pipes upwards
-
RENOPATCH STANDARD CURE
Cures in aproximately 90 minutes at 12°c, 50 minutes at 15°c or 45 minutes at 25°c High quality multi-axle glass cloth for extra strength and better finish Compact packaging Cost effective solution 100% non-shrink silicate resin, minimum odour, non solvent Kits available for 100mm Ø pipes upwards
-
LIGHT DUTY INFLATION / CALIBRATION HOSE...
Continuous Heat Welded PVC Inflation Hose Will invert using air or water up to 50°C For use in tight bends or long runs Supplied in any lengths up to 100m
-
SUPERLINER (Drag-in)
Heavy-duty outer coating for reduced stretch For straight and long pulls up to 80m Low Friction For water-tight applications
