Renoline

Inflation Hoses for multi-use 75mm Ø - 300mm Ø

medium duty inflation / calibration hose 75mm - 300mmØ

	Continuous Heat Welded Inflation Hose
	Will invert using air or water up to 64° c
	Can be used to re-inflate liners
	Supplied in any lengths up to 100m

Order PipeØ Price per

LIGHT duty inflation / calibration hose 75mm - 225mmØ

	Continuous Heat Welded PVC Inflation Hose
	Will invert using air or water up to 50°c
	For use in tight bends or long runs
	Very flexible
	Supplied in any lengths up to 100m

Order PipeØ Price per

RENOLINE TEST RESULTS ARE TESTED TO
EUROPEAN STANDARD BSEN13566-4: 2002
Our Renoline systems have been submitted for vigorous testing at
Total Oil Group, the following test results have been achieved.

TEST	Pass Criteria BSEN 13566-4: 2002	Test Date - February 05 Results Tested by
Elongation Short Term Flexural Modules Flexural Stress at first break Flexural strain at first break Resistance to chemical attack	2% 1500 Mpa 25 Mpa 0.75% 0.45% At 50 Years	4% 1800 Mpa 37 Mpa 2.2% 2.2% At 50 Years

RENOLINE STRUCTURAL LINER MEETS THE CRITERIA FOR BRITISH AND EUROPEAN STANDARD BSEN13566-4: 2002 FOR LINING WITH CURED - IN - PLACE PIPES.

For further information a copy of the BS standard can be obtained at
www.bsi-global.com

PRINT VERSION

Your Order

Your Basket is Empty